Smith’s Poly-WB is a 2-Component, High Performance Waterborne Polyester Polyurethane sealer used as a hard, durable protective or maintenance wear surface over decorative concrete, pavers, concrete stains, etc. with heavy foot traffic exposure. Developed for interior or exterior wear surfaces in residential & commercial installations to protect against long-term chalking in high U.V. exposure environments & for greater film thickness capabilities, better gloss retention, better chemical & stain resistance versus traditional 2-Component water-based Polyurethanes. Direct-to-concrete, stone and paver applications require a primer of either Smith’s Poly-SB (achieves wet look) or Smith’s Poly-SEAL (natural appearance).
Recommended as a Final Topcoat for Commercial & Residential:
- Decorative & Stamped Concrete
- Concrete Countertops
- Terrazzo
- Garage Floor Coatings
- Sealer for Vinyl Chip resinous coating systems
- Pavers
Highlights:
- Good Pot-life – 2 hours at 75°F / 50% Humidity
- Ultraviolet light stable
- Very Good Stain & Chemical Resistance
- High Performance – Much more durable than traditional solvent-based Acrylic Sealers
- Easy to Clean & Maintain
- Wet Look – Enhances Colors
- Non-Blushing
- Dries Clear
- Solid Colors possible with the addition of Smith’s WSC Waterborne Solid Color Packs (Sold Separately)
- Hot Tire Pickup Resistant
- Low VOC’s – Meets Source Specific Standards Rule 1113 established by AQMD in California
