Coval Coatings Primers

Coval Primer is a fast-drying, acetone-based acrylate sealer designed as the base coat to Coval Concrete. The porosity on the surface of concrete can vary from one area to another. For this reason, we recommend using Coval Primer to seal the concrete so that when the Coval Concrete is applied, it will have a uniform consistency. It will also reduce the amount of Coval Concrete used because you are not losing material that is seeping into the surface pores. You can add a stain into the primer if you are looking for a colored finish. Contact Coval for recommendations on the type of stain we recommend.

Recommended Uses

• Precast concrete walls & structures
• Polished concrete
• Masonry pavers
• Bricks
• Cement block
• Driveways
• Paths
• Cement overlays

Important Specifications

Color: Clear to slight amber to rose (depending on temp and humidity) always dries clear.
Finish: Enhancing
Vehicle Type: Solvent Base
Flash Point: (C Penskey-Martens closed cup) -20C/-4F CC VOC: <20 g/ltr
Weight: 6.7lb/gallon Dry Time: 10-20 minutes
Breathable: Yes (Drying Time at 77 Deg F & 50% Relative Humidity)